Self-cleaning separators with disc bowl and automatic solids ejection are used where the percentage of solids in the oil is too high for manual cleaning. These are used mainly for the clarification and purification of fuel oils such as gas oil, diesel oil, heavy fuel oil and lube oil.

Self-cleaning separators discharge solids automatically while the separator is running. This avoids the need to shut down the separator for frequent cleaning.

Self-cleaning separators operate continuously. Solids ejection occurs either by total or partial discharges, or a combination of both with additional self cleaning of the disc stack. Labour intensive cleaning of the discs using CIP systems is not necessary.

Optimum separation efficiency over long operating times is ensured. Maintenance work is required only after 8000 to 16,000 operating hours. The clean oil and the separated water are conveyed to the discharge under pressure by a centripetal twin pump.

Features

• Automatic operation
• Continuous operating mode
• Self-cleaning effect of the bowl without
• CIP systems
• Highly concentrated solids
• High separation efficiency
• Can be used as clarifier and purifier
• Discharge of light and heavy phase under
• pressure by a centripetal twin pump
• Low noise level
• Belt drive
• EX design available